This antenna has proven to be effective in the trucking transport field as well as
for passenger & 4WD vehicle use.  Constructed from 9.5mm solid fibreglass
rods, this antenna is helically wound with 0.8mm diameter copper wire, enclose
in PVC heatshrink.  The antenna features a screwdriver adjustable stainless steel
tip enabling the end user to make slight tuning adjustments if required.
 

ADJUSTABLE TIP - EXPOSED COIL ANTENNAS (Type "ATEC")

To feature the helical wound red copper wire at the top if the antenna we offer
our customers specially heatshrunk antennas, black at the base with a 
clear heatshrink section at the top.  This feature makes the antenna
look more technical.  But practically offers no added performance.
 

CHUNKIES (Type "C")

Our heavy-duty adjustable tip antennas are manufactured from solid 935mm
fibreglass rod, again helically wound but with 1mm PVC insulated wire which is
then terminated to a heavy nickel-plated brass ferrule.  This antenna was designed
to handle more power for customers who have radios which transmit higher
power or have amplification.  These antennas are covered with PVC heatshrink
available in black, blue and white combinations.
   

MODEL	TYPE	DESCRIPTION
A - 104	SAT	1Ft (300mm long) Adj tip antenna
A - 106	SAT	2Ft (600mm long) Adj tip antenna
A - 110	SAT	3Ft (900mm long) Adj tip antenna
A - 111	SATH	3Ft HOLLOW FIBREGLASS  LIGHT WEIGHT ROD
A - 116	SAT	4Ft (1200mm long) Adj tip antenna
A - 121	SAT	5Ft (1500mm long) Adj tip antenna
A - 124	ATEC	2Ft (600mm long) Exposed coil antenna
A - 125	ATEC	3Ft (900mm long) Exposed coil antenna
A - 140	C	3Ft (900mm long) Chunkie
A - 141	C	3Ft COMBO BLK/WHITE OR BLUE/WHITE

This range was designed for long-range communications
specifically for long distance trucking or touring as it is capable
of handling high power transmission.

Two versions were designed: -

(a)  The "JR1" High performance version, helically
wound on 20mm light weight hollow fibreglass radome with 
2mm solid copper wire giving this antenna the low
resistance required for high performance reception and 
transmission.

(b)  The "JR2" Economy version again helically wound
with only 1mm PVC insulated copper wire. 
This antenna still maintains excellent performance.

Both versions are terminated to a heavy nickel-plated brass
ferrule.  Then antenna is produced using hollow fibreglass tube
for greater flexibility and importantly light wight characteristics
allowing for easy vehicle mounting.
     

MODEL	TYPE	DESCRIPTION
A - 150	JR	JR1 4Ft version clear heatshring exposing coil.
A - 151	JR	JR2 4Ft version all black