DYNMAST Pty Ltd.
Tel: 61 2 9829 4133
Fax: 61 2 9618 2990
E-mail: bernie@dynmast.com.au

 

 

 

 

 

The most recent edition to our repeater kit range is our New L1/L2 Dual Band series. Unlike the requirements of commercial GPS users both the antennas and repeater module have been created for high performance Military & commercial applications. The L1/L2 Repeater kit basically only contains the antennas & repeater module, a suitable power supply and quantity RF Coaxial interconnect cables will be required in addition for installation.

 
             

How to Order: Part Number:

GPS-L1L2REPEAT-1 

              

The Dual Band GPS-REPEAT L1/L2 kit consists of the following items:

1. Active – L1/L2 Antenna - Supplied with a pole mount installation option, bottom exit  N Female (Jack) connector (Part No: GPSA5F2DR513GA)

2. Passive – L1/L2 Antenna -  Supplied with bottom exit N Female (Jack) connectors.
(Part No: GPSP2DR813G)

3. L1/L2 Repeater Block – (Part No: AMA-161)  Provides filtering & amplification at both 1530-1580MHz 1220-1230Mhz. It is also used to supply power to the active antenna.
Note:
RF coaxial interconnecting cables are NOT supplied
as part of this kit. Products of this nature are specialized, as
such we recommend custom cable to suit your specific
application. (See page 30 for further information)
Please consult with your technical sales representative.

Above standard kit weight: 2.8 Kgs

Accessories :-
2 Way Splitter Part No: AMA-1255-3-1W
Passive Antenna Part No: GPSP2SR813G
Low Loss Cable assemblies custom manufactured to
order for interconnections
 

Warning – This system may cause interference, variable or inline attenuators should be used to back off the signal to an acceptable level.

HOME | GPS CATALOGUE | PRODUCT CATALOGUE