DYNMAST Pty Ltd.
Tel: 61 2 9829 4133
Fax: 61 2 9618 2990
E-mail: bernie@dynmast.com.au

 

uParch02

GPS OEM Genius 4 = FASTRAX Receiver


The new Fastrax uPatch02 boasts impressive system performance.
The patch and ground plane are ideally matched for optimal signal reception. The superior sensitivity of the receiver provides continuous tracking and navigation now to extremely low signal levels with excellent cold start TTFF performance for demanding applications.

The uPatch02 is simple to use, just connect the power supply and the serial data and it is operational.

Integrated Module - GPS, 25mm Patch Antenna with ground Plane,
Dual Regulators for receiver,          TTL Control,
Power on Reset Circuit

GPS Performance specifications           
                        See page 3 for details 

GPS Protocol
                        NMEA 0183 Standard 

Power Supply
                       3 Volts, @ 180mA – Input range 3 to 7 Volts

 Antenna Connection
                       MCX Receptacle is PC mounted
                       GPS antenna should have a MCX Plug

 

 

Modules supports External I/O’s
With a 2 x 5 pin header, 1.27mm pitch
            Power Supply input
            Boot/Operating mode select
            1PPS Output
            Two Serial Ports (logic levels)

Physical Specification
            Size 41.5 x 27 x 7mm +/- 0.5mm
            Weight 18 grams
            Operating Temperature -40°C to +85°C
            Operating Humidity 0% to 95 % RH, non condensing
            Vibration 4G max

 
Note: Does not support DGPS correction input
HOME | GPS CATALOGUE | PRODUCT CATALOGUE