Tel: 61 2 9829 4133
Fax: 61 2 9618 2990
E-mail: bernie@dynmast.com.au
|
|
Tel: 61 2 9829 4133 Fax: 61 2 9618 2990 E-mail: bernie@dynmast.com.au |
|
 |
GPS
FEATURES
|
|
|
The MiniNav GPS antenna was designed as a low cost high performance antenna suitable for various GPS receivers & applications. This antenna is a stripline design using high quality Teflon PCB. Because of its size, the antenna carries its own ground plane and therefore requires no special additional mounting to offer peak performance. |
|
Frequency Range Bandwidth Boresight Gain Antenna VSWR Polarization Azimuth Elevation Operatirn Temperature Range Dimensions Amplifier Gain Noise Figure Bandwidth Output VSWR 1dB Comp Pt O/P 3rd Order Reverse Isolation Supply Voltage |
1575 MHz 10 MHz 5.0 dBi 1.2:1 Max RHCP Omni Directional Hemispherical -25 to +85 Deg C 75 x 75 x 18mm square 32dB Min, 35dB Max < 1.0dB 10 MHz 1.3:1 Max 0dBm +10dBm >+50dB 5.0V +/- 0.25VDC @ 35mA |
| GPS | P | 6 | 3 | S | P | 3 | ||||||||||||
| Cable Length in Metres | ||||||||||||||||||
| P | Plug | |||||||||||||||||
| S | Socket | |||||||||||||||||
| Connector Type | ||||||||||||||||||
| S | SMA | |||||||||||||||||
| B | BNC | |||||||||||||||||
| M | MCX | |||||||||||||||||
| T | TNC | |||||||||||||||||
| N | N | |||||||||||||||||
| O | No Conn | |||||||||||||||||
| Mounting Options | ||||||||||||||||||
| 1 | Screw Mount - Side Cable Exit | |||||||||||||||||
| 2 | Screw Mount - Bottom Cable Exit | |||||||||||||||||
| 3 | Magnetic Mounting - Side Cable Exit | |||||||||||||||||
| 4 | Magnetic Mount - Bottom Cable Exit | |||||||||||||||||
| 5 | Pole Mount - Bottom Connector Exit | |||||||||||||||||
| 6 | Custom Requirement | |||||||||||||||||
| 7 | Unpackaged - Bottom Cable Exit | |||||||||||||||||
| 8 | Screw Mount - Bottom Connector Exit | |||||||||||||||||
| MiniNav Model | ||||||||||||||||||
| A | Active | |||||||||||||||||
| P | Passive | |||||||||||||||||
|
|
|
|
