Tel: 61 2 9829 4133
Fax: 61 2 9618 2990
E-mail: bernie@dynmast.com.au
|
|
Tel: 61 2 9829 4133 Fax: 61 2 9618 2990 E-mail: bernie@dynmast.com.au |
|
 |
 |
 
|
Dynmast makes
available two GPS amplifiers in our AMA-061 Series.
AMA-061B is our broadband GPS Amplifier and our AMA-061F is a high rejection GPS
filtered.
Both these amplifiers are designed to boost GPS signals for long range
transmission or for a GPS Repeater Kit.
Our filtered amplifier is ideal for boosting GPS signal in noise environments.
These amplifiers can also be used as a DC feeder for a GPS antenna, additional
amplifier or as a DC splitter.
The DC through can be regulated or by passed to the antenna for 5V systems.
|
|
|
Part Number |
AMA-061B | AMA-061F |
|
Frequency Range Bandwith LNA Gain LNA Noise Figure LNA Op 1dB Comp Pt Power Supply Impedance DC thru Resistance DC thru Power I/O VSWR Connector Type Temp Range |
1220-1700 MHz
(suits L1&L2) 480 MHz 38dB+/- 2dB <1.3dB @ 20°C 1 dBm DC Input 8 to 20 Volts @ 15mA or 5V @ 15mA Optional 50 Ohms <4 Ohms 8-20 V @ 100mA or 5V @ 50mA Optional <2:1 TNC Female connectors for Antenna 3 Pin Bayonet coupling power connection -40° to + 85°C @ 100% Humidity |
1575 MHz 10 MHz (+/- 5 MHz) 36 +/- 1dB <1.3dB 1dBm Filter Rejection >70dB @ +/- 50 MHz or 5V @ 15mA Optional Same Same Same Same Same Same Same Same |
 |
|
|
|
|
|
