Tel: 61 2 9829 4133
Fax: 61 2 9618 2990
E-mail: bernie@dynmast.com.au
|
|
Tel: 61 2 9829 4133 Fax: 61 2 9618 2990 E-mail: bernie@dynmast.com.au |
|
 |
 |
|
|
|
PART NUMBER |
A-GPSG1A73SP3 |
GPS Patch Antenna Specification
|
Center Frequency VSWR Bandwidth Attenuation Impedance Peak Gain Gain Coverage Polarization |
1575.42MHz +/- 5MHz 1.5:1 +/- 5MHz +/- 100MHz>30dB 50 Ohms >3dBic based on 7 cm x 7 cm ground plane >-4dBic at –90 <0<+90 (over 75% volume) RHCP |
LNA Specifications
|
LNA Gain (with cable) 28dB Noise Figure VSWR DC Volts DC Current |
Typical 1.5dB Max <2.0 3 V 15MA Max |
GSM Antenna Specifications
|
Working Frequency VSWR Impedance Peak Gain |
880MHz~960MHz; 1710MHz~1990MHz 2:1 50 ohm 2dBi +/- 1dB at 900 MHz 1dBi +/- 1dB at 1800 MHz |
Mechanical Specifications
|
Weight Size Cable Connector Mounting Housing |
<130 gram 80mm x 13mm RG174 2 metres long SMC straight Female for GPS side SMA Female for GSM side Hard Screw Black |
Environmental Specifications
|
Working Temperature Storage Temperature vibration Humidty Weather Proofing |
-40 C~+85 C -40 C~+100 C Sine sweep 1 g (0-p) 10~50~10Hz each axis 95%~100% RH 100% waterproof |
|
|
|
|
